<:s><:#466,12960>If you haven't already installed HelpMaker, you'll find it's quite simple. There is no automated setup program, but all that's necessary is copying a few files to different locations.
<:s><:#233,12960>
<:s><:#932,12960>Veteran HelpMaker users are aware that previous versions of HelpMaker shipped with it's own style sheet. That is not the case any longer. When HelpMaker is first started, it looks for a style sheet called HM.STY in your default style sheet directory. If
it is not there, then HelpMaker will build it for you automatically in a few seconds. This presents two benefits. One less file to package with HelpMaker (less trouble for me, less download time for you) and assurance that you can always get a fresh copy
if your old style sheet becomes damaged or accidentally changed.
<:s><:#233,12960>
<:s><:#699,12960>After HelpMaker creates the style sheet you can format it as you please (face, size, color, alignment, etc.), however, it is suggested that you not alter any of the Breaks or Bullets & Numbers parts of the paragraph styles. The styles are setup to be recog
nized in a specific way by the Windows Help Compiler.
<:s><:#233,12960>
<:s><:#240,12960><+!>Where to put the files<-!><+!>:<-!>
<:s><:#240,12960><+!>
@Indent .35@<:#233,12960>HM.SMM
@Indent .35@<:#233,12960>HMCOLOR.SMM
@Indent .35@<:#233,12960>HMFRMT.SMM
@Indent .35@<:#233,12960>HMHELP.SMM
@Indent .35@<:#233,12960>HMSETUP.SMM
@Indent .35@<:#233,12960>HM8514.DLL
@Indent .35@<:#233,12960>HMEGA.DLL
@Indent .35@<:#233,12960>HMVGA.DLL and
@Indent .35@HMHELP.HLP all go in a directory of your choosing.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#233,12960>HCP.PIF
@Indent .35@<:#233,12960>HMHELP.HPJ and
@Indent .35@<:#466,12960>HMHELP.RTF should be placed in the same directory where your <+)>Help Compiler<-)><+*>HELP_COMPILER<-*>,
<+)>Help Project Editor<-)><+*>HELP_PROJECT_EDITOR<-*>, and <+)>Hot Spot Editor<-)><+*>HOT_SPOT_EDITOR<-*> are kept.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:#233,12960>HMHELP.SAM should be placed in your default Ami Pro document directory.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:#233,12960>HMPAL.SMI goes in your Ami Pro program directory. See <+)>Notes<-)><+*>NOTES<-*>
<:s><:#233,12960>
<:s><:#233,12960>Once you have all the files in place:
@Indent .35@<:#233,12960>3. Change to the directory where you placed HM.SMM.
@Indent .35@<:#233,12960>3. Scroll down the list titled Macros until you see HM.SMM.
@Indent .35@<:#233,12960>4. Select HM.SMM and click on OK.
<:s><:#233,12960>
<:#466,12960>This should add a HelpMaker menu at the beginning of your menu bar and display an icon bar at the lower right-hand corner of your screen. You will initially see the
<+)>Configuration<-)><+*>CONFIGURATION<-*> panel of this help file.
<:#233,12960>
<:p<* >>
@Heading@<:s><:F
@Topic1@CONFIGURATION
>
<:F
@Topic2@Configuration
>
<:F
@Topic3@Configuration
>
<:F
@Topic4@0020
>
Configuration
<:s><:F
@Topic3@installation
>
<:F
@Topic3@install
>
<:F
@Topic3@setup
>
<:#233,12960>There are a few steps that will make things flow more smoothly for you.
<:s><:#233,12960>
<:#466,12960>First, select the HelpMaker menu and then select Setup. The <+)>HelpMaker Setup<-)><+*>HELPMAKER_SETUP<-*> dialog will appear. Each of the items there is explained below:
<:s><:#233,12960>
<:#240,12960><+!>RTF Path<-!>
<:s><:#233,12960>
<:s><:#706,12960>When RTF Path is selected, you are presented with a dialog box prompting you to change to the directory on your hard drive where you will be storing the Rich Text Format files saved from HelpMaker.
<+!>Suggestion:<-!> make this the same directory in which you store your Windows Help Compiler.
<:s><:#233,12960>
<:s><:#240,12960><+!>Project Editor<-!>
<:s><:#233,12960>
<:s><:#473,12960>When Project Editor is selected, you are presented with a dialog box prompting you to change to the directory on your hard drive where your
<+)>Help Project Editor<-)><+*>HELP_PROJECT_EDITOR<-*> is stored.
<+!> Suggestion:<-!> make this the same directory in which you store your Windows Help Compiler.
<:s><:#233,12960>
<:s><:#240,12960><+!>Hot Spot Editor<-!>
<:s><:#233,12960>
<:s><:#473,12960>When Hot Spot Editor is selected, you are presented with a dialog box prompting you to change to the directory on your hard drive where your
<+)>Hot Spot Editor<-)><+*>HOT_SPOT_EDITOR<-*> is stored. <+!>Suggestion:<-!> make this the same directory in which you store your Windows Help Compiler.
<:s><:#233,12960>
<:s><:#240,12960><+!>Help Compiler<-!>
<:s><:#233,12960>
<:s><:#473,12960>When Help Compiler is selected, you are presented with a dialog box prompting you to change to the directory on your hard drive where your Windows
<+)>Help Compiler<-)><+*>HELP_COMPILER<-*> is stored. <+!>Suggestion:<-!> make this the same directory in which you store your Windows Help Compiler.
<:s><:#233,12960>
<:s><:#240,12960><+!>Disable Resume Boxes<-!>
<:s><:#233,12960>
<:s><:#1172,12960>This is a feature for experienced users of HelpMaker. During the process of building your help file (as explained in
<+)>Building Your First Help File<-)><+*>BUILDING_YOUR_FIRST_HELP_FILE<-*>) you are prompted by different Macro Pause dialogs which ask you to perform a specific action, then click on Resume. If you're like me, you'll get really tired of having to click on
these Resume buttons every time you want to format a piece of the document. The Disable Resume Boxes feature allows you to turn off this behavior thus making help file creation faster.
<+!>Suggestion:<-!> It is recommended to leave resume boxes enabled until you are quite experienced with HelpMaker.
<:#233,12960>
<:#240,12960><+!>No HelpMaker Menu<-!>
<:#233,12960>
<:#466,12960>Allows you to turn off the HelpMaker menu. This will speed up program load of HelpMaker and most of the functions are included on the
<+)>icon bar<-)><+*>ICON_BAR<-*>.
<:#233,12960>
<:#240,12960><+!>No ALT-Z Messages<-!>
<:#233,12960>
<:#699,12960>There are some functions in HelpMaker which automatically build a new page in your document and create a popup box footnote. Then, a message appears telling you that you can press ALT+Z to return to the original location after you finish entering the popup
box text. This option in HelpMaker setup allows you to disable those messages. See also:
<:#466,12960>HelpMaker now has <+)>shortcut keys<-)><+*>SHORTCUT_KEYS<-*> which allow you quick access to most HelpMaker functions from the keyboard. This can be turned on or off.
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@HELP_COMPILER
>
<:F
@Topic2@Help Compiler
>
<:F
@Topic3@Help Compiler
>
<:F
@Topic4@0030
>
Help Compiler
<:s><:F
@Topic3@compile
>
<:F
@Topic3@version
>
<:F
@Topic3@hc.exe
>
<:F
@Topic3@hcp.exe
>
<:s><:#699,12960>HelpMaker was developed and tested using the Microsoft Help Compiler version 3.10.505. It may very well, more likely than not, work with earlier or later versions of the same product, or with WinHelp compilers distributed by other manufacturers. However,
I can only guaranty that the formatting done to your Ami Pro 3.0 document will be interpreted properly when used with the version mentioned above.
<:s><:#233,12960>
<:s><:#233,12960>
<:#233,12960>
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@HELP_PROJECT_EDITOR
>
<:F
@Topic2@Help Project Editor
>
<:F
@Topic3@Help Project Editor
>
<:F
@Topic4@0040
>
Help Project Editor
<:s><:F
@Topic3@.HPJ
>
<:F
@Topic3@HPJ
>
<:F
@Topic3@editor
>
<:F
@Topic3@project
>
<:F
@Topic3@version
>
<:s><:#1405,12960>HelpMaker was developed and tested using the Microsoft Help Project Editor version 1.00.0014. This is an application you have which is capable of automating the process of creating a Windows Help project file (.HPJ). More information can be found on help p
roject files in the Windows Help Authoring Guide. <+!>Suggestion:<-!> As of the time of creating this help file,
<+">according to a Microsoft technote found in the Microsoft Knowledgebase on CompuServe<-">, an application called Help Project Editor can be downloaded from the Microsoft Software Library on CompuServe. GO MSL and download WHAT6.EXE. This is the project
editor I use and has been very handy. However, it is not necessary in order to create a WinHelp file, but using a project file provides much more WinHelp functionality.
<:s><:#233,12960>
<:s><:#233,12960>
<:#233,12960>
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@HOT_SPOT_EDITOR
>
<:F
@Topic2@Hot Spot Editor
>
<:F
@Topic3@Hot Spot Editor
>
<:F
@Topic4@0050
>
Hot Spot Editor
<:s><:F
@Topic3@hot spot
>
<:F
@Topic3@editor
>
<:F
@Topic3@graphic
>
<:F
@Topic3@version
>
<:s><:#932,12960>HelpMaker was developed and tested using the Microsoft Hot Spot Editor version 3.50.784. This would be an application you have which is capable of editing SHG, BMP, WMF or DIB graphic files. The Hot Spot Editor allows you to define "hot spots" on a graphic
which can be linked to help file topics or popup boxes (most common application). As of the time of this help file creation, the Microsoft Hot Spot Editor can be downloaded from the WINSDK forum on CompuServe. The file name is SHED.ZIP.
<:s><:#233,12960>
<:s><:#233,12960>Hot Spot Editor.../Start... - executes your Hot Spot Editor.
<:s><:#233,12960>
<:s><:#233,12960>Hot Spot Editor.../Open BMP/SHG/WMP/DIB File... - allows user to specify a graphic file to be opened when your Hot Spot Editor is started.
<:s><:#233,12960>
<:#233,12960>
<:#233,12960>
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@ICON_BAR
>
<:F
@Topic2@Icon Bar
>
<:F
@Topic3@Icon Bar
>
<:F
@Topic4@0080
>
Icon Bar
<:s><:F
@Topic3@toolbar
>
<:F
@Topic3@button
>
<:F
@Topic3@SmartIcon
>
<:F
@Topic3@icon
>
<:s><:#466,12960>Each button has text on it to indicate its purpose. My suggestion is to play around with all of them in a dummy file that you don't intend on keeping. This should familiarize you on how each behaves. Click on the buttons below for a more detailed explana
tion:
<:s><:#233,12960>
<+B>{bmc c:\helpcomp\iconbar.shg}
<:s><:#233,12960>
<:s><:#706,12960><+!>Important:<-!> The iconbar remembers its last position, but in order for it to remember, you have to exit HelpMaker either by selecting HelpMaker/Exit or by clicking on the Exit button on the icon bar itself. One of those two processes will "remember"
the last icon bar position for you. The position will not be remembered if Ami Pro is exited while HelpMaker is still running.
<:s><:#233,12960>
<:s><:#233,12960>
<:#233,12960>
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@BUILDING_YOUR_FIRST_HELP_FILE
>
<:F
@Topic2@Building Your First Help File
>
<:F
@Topic3@Building Your First Help File
>
<:F
@Topic4@0090
>
Building Your First Help File
<:s><:F
@Topic3@beginner
>
<:F
@Topic3@beginning
>
<:F
@Topic3@how to
>
<:F
@Topic3@learning
>
<:F
@Topic3@first timer
>
<:F
@Topic3@directions
>
<:F
@Topic3@instructions
>
<:s><:#699,12960>If you've never authored a WinHelp file before, the following instructions will step you through your first. Otherwise, they'll simply familiarize you with some of the functions of HelpMaker. These instructions assume that you have obtained a help compile
r and help project editor. They also assume that you have configured HelpMaker as described under the help topic
<+)>Configuration<-)><+*>CONFIGURATION<-*>.
<:s><:#233,12960>
@Indent .35@<:s><:#466,12960>1. On the icon bar, click on the New button. A blank document appears. When the cursor is on the first line of the page, it should say Heading at the lower left-hand corner of the screen. This indicates that the Heading paragraph style is currently being
used.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#233,12960>2. Type the word "Contents" (without the quotes). Press ENTER twice.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#233,12960>3. Type a bit of garbage, then press ENTER twice again.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#233,12960>4. Type the words "Second Panel". Press ENTER twice.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#233,12960>5. Click on the Page Break button on the icon bar. You should have a new page now.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#233,12960>6. Type the words "Second Panel". Press ENTER twice.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#233,12960>7. Type a bit of garbage, then press ENTER twice again.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#233,12960>8. Type the word "Contents" and press ENTER.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#233,12960>9. Go back to page 1, place the insertion point on the line with the word "Contents" at the top.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:#699,12960>10. Click on the Format Topic button on the icon bar. You are prompted to place the cursor on the topic line (which you have already done) and then click Resume. Go ahead and click Resume now. HelpMaker proceeds to create several footnote references. It
then stops and asks you to enter a number.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#233,12960>11. Type "0000" in the dialog box and click on OK.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#466,12960>12. Just below that topic, you had typed the words "Second Panel". Highlight those words, FROM LEFT TO RIGHT, then click on the Jump Mark button on the icon bar. HelpMaker prompts you to select the text (which you've already done) and then click Resume.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#233,12960>13. Click on Resume. HelpMaker proceeds to format the text appropriately and create another entry just beside it.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:#466,12960>14. Go back to page 2 and place your insertion point on the first line with the words "Second Panel". Click the Format Topic button on the icon bar as you did in step 10. But, this time, type in the number "0010" when prompted. Click on OK.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#466,12960>15. Just below that topic, highlight the word "Contents", FROM LEFT TO RIGHT, then click on the Jump Mark button on the icon bar. Click on Resume.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#466,12960>16. Click on the Save button on the icon bar. It should default to RTF directory (explained under the help topic
<+)>Configuration<-)><+*>CONFIGURATION<-*>) and UNTITLED.RTF as the file name. These are acceptable. Click on OK.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#466,12960>OK, breathe. You have just completed the formatting of your first WinHelp file. All we have to do now is create a project file, then compile it. Did you remember to start your stopwatch?
@Indent .35@<:s><:#233,12960>
@Indent .35@<:#466,12960>17. Click on the .HPJ button on the icon bar. Your Help Project Editor should start. The following instructions assume that you are using the Microsoft Help Project Editor version 1.00.0014. If not, go directly to step 29.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#233,12960>18. Select Edit/Add New or Existing File. Select the RTF file that you saved in step 16. Click on OK.
@Indent .35@<:s><:#233,12960>25. Under Background Colors, click on the list labeled Scrolling Region. Select Yellow.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#233,12960>26. Click on the list labeled Non-scrolling Region. Select Gray (their spelling, not mine). Click on OK.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#466,12960>27. Select File/Save As. It's a good practice to name your .HPJ file with the same name as the RTF except you'll use an .HPJ extension. Click on OK.
@Indent .35@<:s><:#233,12960>28. Close the Help Project Editor.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#233,12960>29. On the HelpMaker icon bar, click on the Compile button.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:#233,12960>30. Select the .HPJ file you just finished saving in step 27 (or the .RTF file you saved in step 16 if you don't have the Help Project Editor).
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#466,12960>31. Click on OK. The Help Compiler should start. Let it be. WHEN IT FINISHES, click on the Resume button. This should automatically open the WinHelp file you just created. Play with it a bit. Click on the jump marks.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#233,12960>Congratulations. You've just completed what might be your first WinHelp file.
<:s><:#233,12960>
<:s><:#233,12960>
<:#233,12960>
<:s><:#233,12960>
<:s><:#233,12960>
<:s><:#233,12960>
<:s><:#233,12960>
<:s><:#233,12960>
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@NOTES
>
<:F
@Topic2@Notes
>
<:F
@Topic3@Notes
>
<:F
@Topic4@0100
>
Notes
<:s><:F
@Topic3@SmartIcon
>
<:F
@Topic3@icon
>
<:F
@Topic3@network
>
<:F
@Topic3@outdll.dll
>
<:F
@Topic3@directory
>
<:F
@Topic3@HCP.PIF
>
<:F
@Topic3@pif
>
<:F
@Topic3@installation
>
<:#466,12960>The pif file, HCP.PIF, that comes with HelpMaker is set to run a help compiler with the filename HCP.EXE. If this is not your situation, you can edit the .pif file by using PIFEDIT.EXE that comes with Microsoft Windows.
<:s><:#233,12960>
<:s><:#233,12960>If you start HelpMaker and your icon bar appears but with no icons, try the following in this order:
<:s><:#233,12960>
@Indent .35@<:s><:#233,12960>1. Make sure you have your HelpMaker program files setup as per the directions under
<+)>Installation<-)><+*>INSTALLATION<-*>.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#932,12960>2. Make sure there is a file in your Ami Pro program directory called OUTDLL.DLL. If you are using Ami Pro in a shared network environment, you may not have sufficient rights to the Ami Pro program directory and may need the assistance of a network adminis
trator to put OUTDLL.DLL in the program directory for you.<**>
@Indent .35@<:s><:#233,12960>in your Ami Pro program directory. Exit, then restart Ami Pro and then HelpMaker.
@Indent .35@<:s><:#233,12960>
@Indent .35@<:s><:#233,12960>4. Select HelpMaker/Help/About for information on how to contact me.
<:s><:#233,12960>
<:s><:#233,12960>The following files used to create this help file are included with HelpMaker to be an example for you:
<:s><:#233,12960>
@Indent .35@<:#233,12960>HMHELP.SAM
@Indent .35@<:#233,12960>HMHELP.RTF
@Indent .35@<:#233,12960>HMHELP.HPJ
<:s><:#233,12960>
<:s><:#466,12960>HelpMaker is designed and guaranteed by me ONLY to work with Ami Pro 3.0 for Windows. You may get satisfactory results from HelpMaker in other versions of Ami Pro, however, I will be unable to support it in such a situation.
<:s><:#233,12960>
<:s><:#466,12960>The author will not be held responsible for any losses, whether real or intangible, due to the usage of HelpMaker. The author reserves the right to change or cancel any policy or information without notice.
<:s><:#233,12960>
<:s><:#233,12960>
<:#233,12960>
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@REGISTRATION
>
<:F
@Topic2@Registration
>
<:F
@Topic3@Registration
>
<:F
@Topic4@0110
>
Registration
<:F
@Topic3@address
>
<:F
@Topic3@evaluation
>
<:F
@Topic3@cost
>
<:F
@Topic3@license
>
<:#932,12960>HelpMaker is not freeware. You are allowed 30 days to use the program free of charge in order to evaluate it and equate its usefulness, or the lack thereof, to you. After which time, you are required to register each installation of HelpMaker. Upon regis
tration, you will be given a registration ID which can be used by clicking on the About icon and selecting Register. Enter your name in the EXACT same form as it accompanied your registration ID.
<:s><:#233,12960>
<:#233,12960>To register HelpMaker, send $30.00 (US) in check or money order to:
<:s><:#233,12960>
<:s><:#233,12960>Cris Williams
<:s><:#233,12960>3112 Moriah Trails, #207
<:s><:#233,12960>Memphis, TN 38115
<:#233,12960>
<:#240,12960><+!>OR<-!>
<:#233,12960>
<:#240,12960><+!>Register directly online with CompuServe by typing GO SWREG. The registration ID is 2590.<-!>
<:s><:#233,12960>
<:#233,12960>Bulk rates available.
<:s><:#233,12960>
<:#233,12960>Support for HelpMaker may be obtained via the following:
<:s><:R><:#233,12960>Suggestions and complaints are welcome.
<:s><:#233,12960>
<:s><:#233,12960>Bug reports will be rewarded - free upgrade to the next major release of HelpMaker (one per customer). Stipulations:
<:s><:#233,12960>
@Indent .35@<:s><:#233,12960>1. If you find a problem with HelpMaker, report it to me, and
@Indent .35@<:s><:#233,12960>2. If this problem is fixed in a later release of HelpMaker, should there be a later release, and
@Indent .35@<:s><:#233,12960>3. Your report is one of the first ten of reports concerning that specific problem, and
@Indent .35@<:s><:#233,12960>4. You have registered all copies of HelpMaker in use by you or your business.
<:s><:#233,12960>
Also, if you are a registered user of HelpMaker and another person/company registers HelpMaker on your recommendation, you will receive a free upgrade to the next major release of HelpMaker. They must present your name and registration number when they reg
ister.
<:s><:#233,12960>
<:s><:#233,12960>
<:#233,12960>
<:s><:#382,12960><:f160,,>Microsoft, Windows, Help Compiler, Help Project Editor, and Hot Spot Editor are registered trademarks of Microsoft Corporation. CompuServe is a registered trademark of CompuServe, Inc.<:f>
<:s><:#233,12960>
<:#191,12960><:f160,,>The makers of HelpMaker reserve the right to change any information, policies, or pricing without notice.<:f>
<:#233,12960>
<:s><:#233,12960>
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@RUN
>
<:F
@Topic2@Run
>
<:F
@Topic3@Run
>
<:F
@Topic4@0120
>
Run
<:s><:#233,12960>
<:s><:#233,12960>Allows you to execute WINHELP.EXE and open the selected WinHelp file.
<:s><:#233,12960>
<:s><:#233,12960>
<:#233,12960>
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@MACRO
>
<:F
@Topic2@Macro
>
<:F
@Topic3@Macro
>
<:F
@Topic4@0130
>
Macro
<:s><:#233,12960>
<:s><:#466,12960>Depending on whether you selected Macro Hotspot or Macro Footnote, this function will allow you to insert a WinHelp macro. See Help Compiler documentation on parameters and usage of these macros.
<:s><:#233,12960>
<:s><:#233,12960>
<:#233,12960>
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@AUTOREGISTERROUTINE
>
<:F
@Topic2@AutoRegisterRoutine
>
<:F
@Topic3@AutoRegisterRoutine
>
<:F
@Topic4@0140
>
AutoRegisterRoutine
<:s><:#233,12960>
<:s><:#699,12960>RegisterRoutine is an advanced WinHelp macro that allows an author to embed function calls to DLL program files into the WinHelp file. HelpMaker automates the process of creating RegisterRoutine entries in the <[>CONFIG] section of a new or existing help pr
oject file. AutoRegisterRoutine gives you the option to create a hot spot or footnote RegisterRoutine call.
<:s><:#233,12960>
<:s><:#466,12960>Notes: A certain amount of programming experience may be necessary to use the RegisterRoutine WinHelp macro. The AutoRegisterRoutine function is disabled in the shareware version of HelpMaker.
<:s><:#233,12960>
<:s><:#233,12960>
<:#233,12960>
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@COMPILE_AND_TEST
>
<:F
@Topic2@Compile and Test
>
<:F
@Topic3@Compile and Test
>
<:F
@Topic4@0150
>
Compile and Test
<:s><:#233,12960>
<:s><:#466,12960>This function allows you to select preferably an .HPJ, or RTF, file to compile your Rich Text File into a WinHelp file. The help compiler normally runs in a DOS window. After the compilation has ended, you can click on a Resume button to view the newly cr
eated WinHelp file.
<:s><:#233,12960>
<:s><:#233,12960>
<:#233,12960>
<:s><:#233,12960>
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@BITMAP_REFERENCE
>
<:F
@Topic2@Bitmap Reference
>
<:F
@Topic3@Bitmap Reference
>
<:F
@Topic4@0160
>
Bitmap Reference
<:s><:#233,12960>
<:s>Bitmaps can be included into a help file, however, pasting them directly into the file has some limitations. The graphic file size has a maximum in
<:F
@Topic3@right
>
<:F
@Topic3@left
>
<:F
@Topic3@character
>
<:F
@Topic3@size
>
<:F
@Topic3@picture
>
<:F
@Topic3@include
>
<:F
@Topic3@reference
>
<:F
@Topic3@graphic
>
<:F
@Topic3@bitmap
>
bytes (usually 64K). But, if you include your graphics into the help file via bitmap reference, then there is no limitation on the graphic file size (only on your patience as the compiler slows down to compress them).
<:s><:#233,12960>
<:s><:#699,12960>This is just what the bitmap reference function was developed for in HelpMaker. You just place your cursor where you want the bitmap to be included, then click the Bitmap Ref button. HelpMaker will prompt you to select the graphic file and the formatting
preference. This rest is automated. See your Help Compiler documentation concerning the meanings of character, left, and right aligned.
<:s><:#233,12960>
<:s><:#233,12960>
<:#233,12960>
<:s><:#233,12960>
<:s><:#233,12960>
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@BITMAP_POPUP
>
<:F
@Topic2@Bitmap Popup
>
<:F
@Topic3@Bitmap Popup
>
<:F
@Topic4@0170
>
Bitmap Popup
<:s><:#233,12960>
<:s><:F
@Topic3@context string
>
<:F
@Topic3@hotspot
>
<:F
@Topic3@box
>
<:F
@Topic3@popup
>
<:F
@Topic3@picture
>
<:F
@Topic3@graphic
>
<:F
@Topic3@bitmap
>
If you are an advanced WinHelp author and are familiar with editing graphics with a HotSpot editor, this may very well save you some time. The bitmap popup function allows you to enter the context string you specified for a certain hotspot in a graphic. I
t then creates the appropriate footnote. All you have to do is type in the text that will appear in the popup box.
<:s><:#233,12960>
<:s><:#233,12960>Hint: When creating hotspots on a graphic, be sure to write down the EXACT context strings so you'll have them ready when you get to this step.
<:s><:#233,12960>
<:s><:#233,12960>
<:#233,12960>
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@NEW
>
<:F
@Topic2@New
>
<:F
@Topic3@New
>
<:F
@Topic4@0180
>
New
<:s><:#233,12960>
<:s><:#466,12960>Creates a new document using HM.STY. If HM.STY does not exist, it creates it for you and automatically sets the first paragraph style to Heading.
<:s><:#233,12960>
<:s><:#233,12960>
<:#233,12960>
<:s><:#233,12960>
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@OPEN
>
<:F
@Topic2@Open
>
<:F
@Topic3@Open
>
<:F
@Topic4@0190
>
Open
<:s><:#233,12960>
<:s><:#1398,12960>Allows you to open a saved RTF file, or it's relative Ami Pro .SAM file. When a file is saved using HelpMaker, it saves the file as a RTF (Rich Text Format) file, but also saves a duplicate in your default Ami Pro document directory with the same name, but
using the .SAM extension (Ami Pro document format). I know, I know. You're wondering why I would do such a strange thing. Well, when an RTF file is saved, then reopened, something is lost in reference to the help file creation formatting done to it. Th
e help compiler seems to gripe about things even though it looks fine on screen. Well, an option called Open relative SAM has been provided (and is default) in the File/Open dialog. You do have the option to open the RTF, however.
<:s><:#233,12960>
<:s><:#233,12960>
<:#233,12960>
<:s><:#233,12960>
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@SAVE
>
<:F
@Topic2@Save
>
<:F
@Topic3@Save
>
<:F
@Topic4@0200
>
Save
<:s><:#233,12960>
<:s><:#233,12960>The current file is saved as RTF and as an Ami Pro document.
<:s><:#233,12960>
<:s><:#233,12960>
<:#233,12960>
<:s><:#233,12960>
<:s><:#233,12960>
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@POPUP_BOX
>
<:F
@Topic2@Popup Box
>
<:F
@Topic3@Popup Box
>
<:F
@Topic4@0210
>
Popup Box
<:s><:#233,12960>
<:s><:#699,12960>In the past, HelpMaker users could designate text as a popup mark and then they were told "remember to do this....." No longer. Now, HelpMaker formats the popup mark and automatically creates the popup box text at the end of your help file. It also provi
des a shortcut key to get you right back to where you started once you finish entering the popup text.
<:s><:#233,12960>
<:s><:#233,12960>
<:#233,12960>
<:s><:#233,12960>
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@OPEN_HPJ_FILE
>
<:F
@Topic2@Open HPJ File
>
<:F
@Topic3@Open HPJ File
>
<:F
@Topic4@0220
>
Open HPJ File
<:s><:#233,12960>
<:s><:#233,12960>Allows user to specify a .HPJ project file to be opened when your Help Project Editor is started.
<:s><:#233,12960>
<:s><:#233,12960>
<:#233,12960>
<:s><:#233,12960>
<:s><:#233,12960>
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@FONTS
>
<:F
@Topic2@Fonts
>
<:F
@Topic3@Fonts
>
<:F
@Topic4@0230
>
Fonts
<:s><:#233,12960>
<:s><:#233,12960>Allows you to specify what font face and size is used during automatic style sheet creation (in the event HM.STY does not exist).
<:s><:#233,12960>
<:s><:#233,12960>
<:#233,12960>
<:s><:#233,12960>
<:s><:#233,12960>
<:s><:p<* >>
@Heading@<:s><:F
@Topic1@PAGE_BACKGROUND
>
<:F
@Topic2@Page Background
>
<:F
@Topic3@Page Background
>
<:F
@Topic4@0240
>
Page Background
<:s><:#233,12960>
<:s><:#699,12960>Allows you to specify a color for the page background in the event you specify a similar color in your help project file for the background of the help window. This makes formatting a bit more WYSIWYG in that you'll probably be changing the color of your t
ext in such a case. HelpMaker automatically remembers the last page background color you used and changes to that color when it is started.
<:s><:#233,12960>
<:s><:#233,12960>
<:#233,12960>
<:s><:#233,12960>
<:s><:#233,12960>
<:s><:#233,12960>
<:s><:p<* >>
<:s><:F
@Topic1@NEWBTN
>
Creates a new document using the HM.STY style sheet. If this style sheet does not exist, it is created.<:p<* >>
<:s><:F
@Topic1@OPENBTN
>
Allows you to open a saved RTF file, or it's relative Ami Pro .SAM file. When a file is saved using HelpMaker, it saves the file as a RTF (Rich Text Format) file, but also saves a duplicate in your default Ami Pro document directory with the same name, but
using the .SAM extension (Ami Pro document format). I know, I know. You're wondering why I would do such a strange thing. Well, when an RTF file is saved, then reopened, something is lost in reference to the help file creation formatting done to it. Th
e help compiler seems to gripe about things even though it looks fine on screen. Well, an option called Open relative SAM has been provided (and is default) in the File/Open dialog. You do have the option to open the RTF, however.<:p<* >>
<:s><:F
@Topic1@SAVEBTN
>
Saves the current document to Rich Text Format and to Ami Pro document format. See also:
<+)>Open<-)><+*>OPEN<-*><:p<* >>
<:s><:F
@Topic1@CLOSEBTN
>
Closes the current file, if one is open.<:p<* >>
<:s><:F
@Topic1@PGBRKBTN
>
Inserts a page break at the current location, then changes the first line of the new page to the Heading paragraph style.<:p<* >>
<:F
@Topic1@TOPICBTN
>
Formats the topic line on a help panel accordingly so that the help compiler recognizes that text as a valid context string. See the HMHELP.SAM file that is packaged with HelpMaker for examples.<:p<* >>
<:s><:F
@Topic1@JUMPBTN
>
Formats text to create a jump spot that will navigate the help file to another topic by clicking on the jump.<:p<* >>
<:s><:F
@Topic1@POPUPBOXBTN
>
Formats the selected text to be a popup box jump area. A new page is created in the document and you can press ALT-X to return to the original part of the document when finished entering the popup box text.<:p<* >>
<:s><:F
@Topic1@REGROUTINEBTN
>
RegisterRoutine is an advanced WinHelp macro that allows an author to embed function calls to DLL program files into the WinHelp file. HelpMaker automates the process of creating RegisterRoutine entries in the <[>CONFIG] section of a new or existing help pr
oject file. AutoRegisterRoutine gives you the option to create a hot spot or footnote RegisterRoutine call.
<:s><:#233,12960>
<:s>Notes: A certain amount of programming experience may be necessary to use the RegisterRoutine WinHelp macro. The AutoRegisterRoutine function is disabled in the shareware version of HelpMaker.<:p<* >>
<:s><:F
@Topic1@SEARCHWORDBTN
>
Allows you to specify keywords that can be searched on when the help file is displayed.<:p<* >>
<:s><:F
@Topic1@MACROHOTSPOTBTN
>
Formats text to be a hot spot which can be clicked to execute the specified WinHelp macro.<:p<* >>
<:s><:F
@Topic1@MACROFOOTNOTEBTN
>
Creates a footnote on a help panel (page) that executes the specified WinHelp macro when that panel is initially displayed.<:p<* >>
<:s><:F
@Topic1@BITMAPREFBTN
>
Creates a reference to a graphic file in the help document. This function was used to insert this picture of the icon bar (with it's hot spots) into this help file at this location.<:p<* >>
<:s><:F
@Topic1@BITMAPPOPUPBTN
>
Creates popup box text that will be linked to a graphic hot spot. This function was used to create this popup box.<:p<* >>
<:s><:F
@Topic1@HOTSPOTEDITORBTN
>
Executes your HotSpot Editor. See also: <+)>Configuration<-)><+*>CONFIGURATION<-*><:p<* >>
<:s><:F
@Topic1@FONTSBTN
>
Allows you to select the default face and size of the font used during automatic creation of HM.STY.<:p<* >>
<:s><:F
@Topic1@HPJBTN
>
Executes your Help Project Editor. See also: <+)>Configuration<-)><+*>CONFIGURATION<-*><:p<* >>
<:s><:F
@Topic1@COMPILEBTN
>
Allows you to select an .HPJ or RTF file to compile. See also: <+)>Configuration<-)><+*>CONFIGURATION<-*><:p<* >>
<:s><:F
@Topic1@HELPBTN
>
Opens this help file.<:p<* >>
<:F
@Topic1@EXITBTN
>
Exits HelpMaker.<:p<* >>
@Heading@<:F
@Topic1@SHORTCUT_KEYS
>
<:F
@Topic2@Shortcut Keys
>
<:F
@Topic3@Shortcut Keys
>
<:F
@Topic4@0250
>
Shortcut Keys
<:#233,12960>
<:#466,12960>When enabled through HelpMaker Setup, the following are shortcut keys for most of the HelpMaker functions. If you like, print this help topic for a quick reference until you are familiar with the keystrokes:
Click on the buttons and check boxes in the picture below for details:
<:#233,12960>
<+B>{bmc c:\helpcomp\setup.shg}<:p<* >>
<:F
@Topic1@SETUPBTN
>
Produces the <+)>HelpMaker Setup<-)><+*>HELPMAKER_SETUP<-*> dialog.<:p<* >>
<:F
@Topic1@NEWTOPICBTN
>
Although the Format Topic function simply formats an existing topic to help compiler specs, the New Topic button automates the whole process of creating the new page, new topic, THEN formatting it.<:p<* >>
<:F
@Topic1@RTFPATHBTN
>
Produces a dialog box that allows you to specify what directory your RTF files will be store in. See also:
Produces a dialog which allows you to select the help project editor that you will be using in conjunction with HelpMaker.<:p<* >>
@NarrowPopUp@<:F
@Topic1@DONEBTN
>
Close the HelpMaker Setup dialog and implements the changes you specified.<:p<* >>
<:F
@Topic1@NOALTZMESSAGESBTN
>
There are some functions in HelpMaker which automatically build a new page in your document and create a popup box footnote. Then, a message appears telling you that you can press ALT+Z to return to the original location after you finish entering the popup
box text. This option in HelpMaker setup allows you to disable those messages. See also: